[Translate to Arabic:]
During Excavation the driver can only assume the correct depth. To verify the depth needs to be checked manually.
[Translate to Arabic:]
Creating surfaces with multiple slope changes requires even more manual checks.
[Translate to Arabic:]
Manual measurement causes high operating costs and requires a lot of time.
[Translate to Arabic:]
The operator can only visually duplicate previous slopes and then manually check them.
[Translate to Arabic:]
The surveyor who measures the depth manually has to move into a risk zone.
[Translate to Arabic:]
If the operator has not enough experience it will be difficult to get a good result.
The 2D system Xsite EASY measures depth, elevation and inclination of the scoop and shows the scoop position graphically and numerically on the display. The upper carriage sensor thereby guarantees correct measurements for every excavator position, whether on a slope or on level ground. An optional LED display additionally shows at a glance whether the target level has already been achieved, or whether further excavation is required. Thereby you always maintain an overview of the exact work progress and you can accurately implement specifications.
[Translate to Arabic:]
With Xsite PRO you can also benefit from additional features, like up to two GNSS antennas, which determine the position of the excavator via satellite. Thanks to the fast processor, the measured values are processed in real-time and are displayed on the 8.4“ graphic display immediately. The option of defining multiple profiles for different work assignments and having them ready at any time saves time, fuel and material and at the same time increases the efficiency of your machine.
[Translate to Arabic:]
With Xsite PRO 3D you can also benefit from additional features, like up to two GNSS antennas, which determine the position of the excavator via satellite. Thanks to the fast processor, the measured values are processed in real-time and are displayed on the 8.4“ graphic display immediately. The option of defining multiple profiles for different work assignments and having them ready at any time saves time, fuel and material and at the same time increases the efficiency of your machine.